Dull decks, like male pattern baldness, creep up over time. We can’t say much for the male pattern baldness, but fortunately for your deck, Penofin Pro-Tech Brightener can restore brightness and beauty - even in decks that have been neglected. Don't replace - restore!
Penofin Pro-Tech Brightener:
- Prepares hardwood for finishing
- Re-establishes the Ph balance of wood after stripping and cleaning
- Reduces mill glaze for better penetration
- Removes gray weathered discoloration
- Neutralizes tannin bleed
- Removes watermarks
- Restores wood to its mill-bright color
- Works on all types of wood, decking, siding, and fences
 |  |
Application
Note: Always wear rubber gloves, eye protection, and solid shoes when applying any Penofin product.
- Sweep the surface with a stiff broom or use a blower to clean the area of debris.
- Add 1-2 cups of Pro-Tech Brightener into a gallon of clean water and mix.
- Wet the surface with a garden hose and sprayer.
- Using a brush, mop, or pump-up garden sprayer, apply the solution liberally.
- Mist occasionally so the solution does not dry on the surface.
- Agitate with a broom or stiff-bristled brush for 15-20 minutes.
- Thoroughly rinse/hose off the surface with water.
If you plan on staining your deck, make sure to wait 24-48 hours after applying Pro-Tech Brightener.
On average, one gallon of Pro-Tech Brightener will cover approximately 300-400 feet (depending on surface type). One container will make 8-16 gallons of brightener solution.
When you choose Penofin, not only are you getting a high-quality product that delivers superior results, you're using an environmentally-friendly product that's safe to use around kids and pets.